Cookie Img
Send Inquiry Send SMS
Home » Products » Phospho Tungstic Acid » Phospho Tungstic Acid

Phospho Tungstic Acid

Phospho Tungstic Acid
Phospho Tungstic Acid
Product Code : CAS NO : 12501-34-4
Brand Name : KAROLINSKA
Price And Quantity
  • Minimum Order Quantity
  • 25
  • Unit of Measure
  • Kilograms/Kilograms
  • Price Range
  • 4000 - 5000 INR
Product Specifications
  • Solubility
  • water soluble
  • Shelf Life
  • 5 Years
  • Properties
  • Phosphotungstic acid can be prepared by the reaction of sodium tungstate, Na2WO4.2H2O, with phosphoric acid, H3PO4, acidified with hydrochloric acid, HCl.[2] Phosphotungstic acid solutions decompose as the pH is increased. A step-wise decomposition has been determined and the approximate compositions at various pH values are as follows:[8] pH principal components 1.0 [PW12O40]3− 2.2 [PW12O40]3−, [P2W21O71]6−, [PW11O39]7− 3.5 [PW12O40]3−, [P2W21O71]6−, [PW11O39]7−, [P2W18O62]6−, [P2W19O67]10− 5.4 [P2W21O71]6−, [PW11O39]7−, [P2W18O62]6− 7.3 [PW9O34]9− 8.3 PO43−, WO42− The species [PW11O39]7− is a lacunary, or defective Keggin ion. The [P2W18O62]6− has a Dawson structure. At pH less than 8, the presence of ethanol or acetone stabilises the anion, [PW12O40]3−, reducing decomposition.[8] Tungstophosphoric acid is thermally stable up to 400 °C, and is more stable than the analogous silicotungstic acid, H4SiW12O40.[9] Large quantities of polar molecules such as pyridine are absorbed into the bulk phase and not simply on the surface. Solid state NMR studies of ethanol absorbed in the bulk phase show that both protonated dimers, ((C2H5OH)2H+) and monomers, (C2H5OH2+) are present. Phosphotungstic acid is less sensitive to reduction than phosphomolybdic acid. Reduction with uric acid or iron(II) sulfate produces a brown coloured compound. the related silicotungstic acid when reduced forms a similar brown compound where one of the four W3 units in the Keggin structure becomes a metal-metal bonded cluster of three edge shared W(IV) octahedra.[10] Phosphotungstic acid is the strongest of heteropolyacids. Its conjugate base is the PW12O403− anion.[11] Its acidity in acetic acid has been investigated and shows that the three protons dissociate independently rather than sequentially, and the acid sites are of the same strength.[12] One estimate of the acidity is that the solid has an acidity stronger than H0 =−13.16,[9] which would qualify the compound as a superacid. This acidic strength means that even at low pH the acid is fully dissociated.
  • Product Type
  • Powder
  • Storage
  • Room Temperature
  • Molecular Weight
  • 2,880.2 g/mol Kilograms (kg)
  • Shape
  • Crystal
  • Poisonous
  • NO
  • HS Code
  • 2811
  • Melting Point
  • 89 °C
  • Molecular Formula
  • H3PW12O40
  • Grade
  • Extra Pure
  • Taste
  • Odorless
  • Physical Form
  • Powder
  • Structural Formula
  • H3PW12O40
  • Purity
  • 99%min
  • CAS No
  • 1343-93-7
  • Usage
  • Catalyst In common with the other heteropolyacids phosphotungstic acid is a catalyst and its high acidity and thermal stability make it a catalyst of choice according to some researchers.[13] It is in solution as a homogeneous catalyst, and as a heterogeneous catalyst "supported" on a substrate e.g. alumina, silica. Some acid catalysed reactions include: the homogeneous catalysis of the hydrolysis of propene to give 2-propanol the homogeneous catalysis of the Prins reaction the heterogeneous catalysis of the dehydration of 2-propanol to propene and methanol to hydrocarbons. Dyeing and pigments Phosphotungstic acid has been used to precipitate different types of dyes as "lakes".[14] Examples are basic dyes and triphenylmethane dyes, e.g. pararosaniline derivatives. Histology Phosphotungstic acid is used in histology for staining specimens, as a component of phosphotungstic acid haematoxylin, PTAH, and “trichrome” reagents, and as a negative stain for imaging by a transmission electron microscope. Phosphotungstic acid haematoxylin (PTAH) Mallory described the reagent now generally known as PTAH in 1897.[16] PTAH stains tissues either reddish brown or blue depending on their type. This property of simultaneously staining two different colours is different from other haematoxylin reagents e.g. alum-haematoxylin. The role of phosphotungstic acid and the mechanism of staining is not fully understood. Interestingly the active component of haematoxylin is the oxidised form, haematin, although this rarely acknowledged in the literature which refer to haematoxylin staining. Phosphotungstic acid forms a lake with haematin.[17] The make –up of the reagent is uncertain, examination of a year old sample showed there to be three coloured components, blue, red and yellow.[18] These were not identified. Some investigations of “model” systems, reacting various compounds such as amino acids, purines, pyrimidines and amines with PTAH show that they give rise to different colours. Trichrome reagents In these reagents two or three basic dyes are used with phosphotungstic acid, in either a one step or multi-stage procedure. These reagents colour different tissue types different colours. Again the mechanism of staining is not fully understood. Some explanations include the proposal that phosphotungstic acid acts as a mordant to bind the dye to the tissue[20] or that alternatively it binds to tissue blocking it to dye molecules. Negative staining Adsorption onto tissue or the surface of viruses and its electron density are the bases of phosphotungstic acids action as a negative stain. This electron density arises from the presence of the 12 tungsten atoms which each have an atomic number of 74. The mechanism of the adsorption onto tissue has been proposed as being electrostatic rather than involving hydrogen bonding, as adsorption is not affected by pH. Analysis The potassium salt is only slightly soluble, unlike most other phosphotungstate salts, and has been proposed as a method for the gravimetric analysis of potassium. Precipitation of proteins In a number of analytical procedures one of the roles of phosphotungstic acid is to precipitate out proteins. It has been termed a "universal" precipitant for polar proteins.[23] Further studies showed that no precipitation occurred with α-amino groups but did occur with guanidino, ε-amino and imidazole groups. Medicinal Very little work appears to have been carried out in this area. One example relates to liver necrosis in rats. Composite proton exchange membranes The heteropoly acids, including phosphotungstic acid, are being investigated as materials in composite proton exchange membranes, such as Nafion. The interest lies in the potential of these composite materials in the manufacture of fuel cells as they have improved operating characteristics
  • Application
  • Lab Chemicals
Product Description

Leveraging upon our vast industry experience, we are engaged in manufacturing, exporting and supplying an excellent quality of Phosphotungstic Acid. The provided chemical is processed under the vigilance of highly skilled professionals by utilizing superior grade chemical compound with the aid of sophisticated technology. It is used to precipitate different types of dyes. Further, we offer this Phosphotungstic Acid in enormous packaging options at marginal prices.

Features:

  • Thermal stability
  • Non hazardous
  • High acidity
  • Highly effective
Trade Information
  • FOB Port
  • Mumbai
  • Payment Terms
  • Cash Against Delivery (CAD), Cash on Delivery (COD), Cash Advance (CA), Cash in Advance (CID), Cheque
  • Delivery Time
  • 1 Week
  • Sample Available
  • Yes
  • Sample Policy
  • Within a certain price range free samples are available
  • Packaging Details
  • with 25 kg drum packing
  • Main Export Market(s)
  • Asia, Australia, Central America, North America, South America, Eastern Europe, Western Europe, Middle East, Africa
  • Main Domestic Market
  • All India

KAROLINSKA INDUSTRIES

Contact Us

( *represents compulsory fields )

Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.



Contact Us !!
Surbhi Complex, E-702, Sai Nagar, M.G.X. Road No. 1, Kandivali West, Mumbai - 400067, Maharashtra, India
Phone :+919206046294
Mr. Jitendra K. Mehta (Proprietor)
Mobile :+919206046294
Trust Stamp
Product Showcase